Part 4: Packet parsing

This part explains how to parse packets and use the different layers (protocol parsers)

Table of contents:


Packet parsing, editing and crafting are a major part of PcapPlusPlus and is the essence of the Packet++ library. There is a long list of protocols currently supported, each of them is represented by a Layer class which (in most cases) supports both parsing of the protocol, editing and creation of new layers from scratch.

This tutorial will go through the packet parsing fundamentals and the next tutorial will focus on packet crafting and editing. The tutorial demonstrate parsing on a few popular protocols:

  • Ethernet
  • IPv4
  • TCP
  • HTTP

For further information about these protocols and the other protocols supported in PcapPlusPlus please go to the API documentation

Packet parsing basics

In this tutorial we'll read a packet from a pcap file, let PcapPlusPlus parse it, and see how we can retrieve data from each layer. Let's start by writing a main method and add the includes that we need:

#if !defined(WIN32) && !defined(WINx64)
#include  // this is for using ntohs() and htons() on non-Windows OS's
#include "stdlib.h"
#include "Packet.h"
#include "EthLayer.h"
#include "IPv4Layer.h"
#include "TcpLayer.h"
#include "HttpLayer.h"
#include "PcapFileDevice.h"

int main(int argc, char* argv[])
	// We'll write our code here

As you can see we added an include to Packet.h which contains the basic parsed packet structures, to PcapFileDevice.h which contains the API for reading from pcap files and to all of the layers which we want to retrieve information from. In addition we included in.h for using htons() and ntohs() which we'll use later. This include is relevant for non-Windows operating systems only.

Now let's read the packet from the pcap file. This pcap file contains only 1 packet, so we'll open the reader, read the packet and close the reader:

	// use the IFileReaderDevice interface to automatically identify file type (pcap/pcap-ng)
// and create an interface instance that both readers implement
pcpp::IFileReaderDevice* reader = pcpp::IFileReaderDevice::getReader("1_http_packet.pcap");

// verify that a reader interface was indeed created
if (reader == NULL)
	printf("Cannot determine reader for file type\n");

// open the reader for reading
if (!reader->open())
	printf("Cannot open input.pcap for reading\n");

// read the first (and only) packet from the file
pcpp::RawPacket rawPacket;
if (!reader->getNextPacket(rawPacket))
	printf("Couldn't read the first packet in the file\n");
	return 1;

// close the file reader, we don't need it anymore

The next step is to let PcapPlusPlus parse the packet. We do this by creating an instance of the Packet class and giving it in the constructor a pointer to the RawPacket instance we have:

	// parse the raw packet into a parsed packet
pcpp::Packet parsedPacket(&rawPacket);

Before we dive into the protocols, let's remember how the Packet class is built: it contains a link list of Layer instances, each layer points to the next layer in the packet. In our example: Ethernet layer will be the first one, it will point to IPv4 layer which will point to TCP layer and finally we'll have HTTP request layer. The Packet class exposes this link list so we can iterate over the layers and retrieve basic information like the protocols they represent, sizes, etc. Let's see the code:

	// first let's go over the layers one by one and find out its type, its total length, its header length and its payload length
for (pcpp::Layer* curLayer = parsedPacket.getFirstLayer(); curLayer != NULL; curLayer = curLayer->getNextLayer())
	printf("Layer type: %s; Total data: %d [bytes]; Layer data: %d [bytes]; Layer payload: %d [bytes]\n",
			getProtocolTypeAsString(curLayer->getProtocol()).c_str(), // get layer type
			(int)curLayer->getDataLen(),                              // get total length of the layer
			(int)curLayer->getHeaderLen(),                            // get the header length of the layer
			(int)curLayer->getLayerPayloadSize());                    // get the payload length of the layer (equals total length minus header length)

As you can see, we're using the getFirstLayer() and getNextLayer() APIs to iterate over the layers. In each layer we have the following information:

  • getProtocol() - get an enum of the protocol the layer represents
  • getHeaderLen() - get the size of the layer's header, meaning the size of the layer data
  • getLayerPayloadSize() - get the size of the layer's payload, meaning the size of all layers that follows this layer
  • getDataLen() - get the total size of the layer: header + payload

For printing the protocols I used a simple function that takes a ProtocolType enum and returns a string:

	std::string getProtocolTypeAsString(pcpp::ProtocolType protocolType)
	switch (protocolType)
	case pcpp::Ethernet:
		return "Ethernet";
	case pcpp::IPv4:
		return "IPv4";
	case pcpp::TCP:
		return "TCP";
	case pcpp::HTTPRequest:
	case pcpp::HTTPResponse:
		return "HTTP";
		return "Unknown";

Let's see the output so far:

	Layer type: Ethernet; Total data: 443 [bytes]; Layer data: 14 [bytes]; Layer payload: 429 [bytes]
Layer type: IPv4; Total data: 429 [bytes]; Layer data: 20 [bytes]; Layer payload: 409 [bytes]
Layer type: TCP; Total data: 409 [bytes]; Layer data: 32 [bytes]; Layer payload: 377 [bytes]
Layer type: HTTP; Total data: 377 [bytes]; Layer data: 377 [bytes]; Layer payload: 0 [bytes]

Parsing Ethernet

Now let's see what information we can get from the first layer in this packet: EthLayer. First let's get a pointer to this layer. We can use the methods we used before and cast the Layer* to EthLayer* but the Packet class offers a more convenient way to do that:

	// now let's get the Ethernet layer
pcpp::EthLayer* ethernetLayer = parsedPacket.getLayerOfType<pcpp::EthLayer>();
if (ethernetLayer == NULL)
	printf("Something went wrong, couldn't find Ethernet layer\n");

As you can see we used the templated method getLayerOfType<pcpp::EthLayer>() which returns a pointer to EthLayer if exists in the packet or NULL otherwise. Now we are ready to start getting some information. The Ethernet layer is quite simple so there's not much information we can get. We can basically get the source and destination MAC addresses and the Ether Type of the next layer:

	// print the source and dest MAC addresses and the Ether type
printf("\nSource MAC address: %s\n", ethernetLayer->getSourceMac().toString().c_str());
printf("Destination MAC address: %s\n", ethernetLayer->getDestMac().toString().c_str());
printf("Ether type = 0x%X\n", ntohs(ethernetLayer->getEthHeader()->etherType));

For getting the source and destination MAC addresses EthLayer exposes methods which return an instance of type MacAddress which encapsulates MAC addresses and provides helper function such as print the MAC address as a nice string (like we have in our code example). For getting the Ether Type we call getEthHeader() which casts the raw packet bytes into a struct: ether_header* and we can read the Ether Type from this struct. Since packet raw data is stored in network order, we need to convert the Ether Type value from network to host order using ntohs()

The output is the following:

	Source MAC address: 00:50:43:01:4d:d4
Destination MAC address: 00:90:7f:3e:02:d0
Ether type = 0x800

Parsing IPv4

Now let's get the IPv4 layer, we'll do it in the same way as before using the template getLayerOfType<pcpp::IPv4Layer>() method:

	// let's get the IPv4 layer
pcpp::IPv4Layer* ipLayer = parsedPacket.getLayerOfType<pcpp::IPv4Layer>();
if (ipLayer == NULL)
	printf("Something went wrong, couldn't find IPv4 layer\n");

Let's get some information from the IPv4Layer:

	// print source and dest IP addresses, IP ID and TTL
printf("\nSource IP address: %s\n", ipLayer->getSrcIpAddress().toString().c_str());
printf("Destination IP address: %s\n", ipLayer->getDstIpAddress().toString().c_str());
printf("IP ID: 0x%X\n", ntohs(ipLayer->getIPv4Header()->ipId));
printf("TTL: %d\n", ipLayer->getIPv4Header()->timeToLive);

As you can see this layer exposes 2 methods for reading the source and destination IP addresses in an easy-to-use wrapper class called IPv4Address. This class provides various capabilities, one of them is printing the IP address as a string. Next, we use the getIPv4Header() method which casts the raw packet bytes to a struct called iphdr* and we can retrieve the rest of the data from there. Since the packet data is in network order, we need to use ntohs() when getting data larger than 1 byte (like when reading the IP ID).

Here is the output:

	Source IP address:
Destination IP address:
IP ID: 0x36E4
TTL: 64

Parsing TCP

Let's get the TCP layer:

	// let's get the TCP layer
pcpp::TcpLayer* tcpLayer = parsedPacket.getLayerOfType<pcpp::TcpLayer>();
if (tcpLayer == NULL)
	printf("Something went wrong, couldn't find TCP layer\n");

Now let's get the TCP data:

	// printf TCP source and dest ports, window size, and the TCP flags that are set in this layer
printf("\nSource TCP port: %d\n", (int)ntohs(tcpLayer->getTcpHeader()->portSrc));
printf("Destination TCP port: %d\n", (int)ntohs(tcpLayer->getTcpHeader()->portDst));
printf("Window size: %d\n", (int)ntohs(tcpLayer->getTcpHeader()->windowSize));
printf("TCP flags: %s\n", printTcpFlags(tcpLayer).c_str());

Here also, like the layers we saw before, TCP layer exposes a method getTcpHeader() which casts the raw packet bytes to a struct tpchdr* which contains all of the TCP fields. That way we can get the source and destination ports, the windows size and any other TCP field. Notice the need of using ntohs() to convert the data from network to host byte order because the raw packet arrives in network order. I also wrote a small function that gathers all of the TCP flags on the packet and prints them nicely:

	std::string printTcpFlags(pcpp::TcpLayer* tcpLayer)
	std::string result = "";
	if (tcpLayer->getTcpHeader()->synFlag == 1)
		result += "SYN ";
	if (tcpLayer->getTcpHeader()->ackFlag == 1)
		result += "ACK ";
	if (tcpLayer->getTcpHeader()->pshFlag == 1)
		result += "PSH ";
	if (tcpLayer->getTcpHeader()->cwrFlag == 1)
		result += "CWR ";
	if (tcpLayer->getTcpHeader()->urgFlag == 1)
		result += "URG ";
	if (tcpLayer->getTcpHeader()->eceFlag == 1)
		result += "ECE ";
	if (tcpLayer->getTcpHeader()->rstFlag == 1)
		result += "RST ";
	if (tcpLayer->getTcpHeader()->finFlag == 1)
		result += "FIN ";

	return result;

Another cool feature TcpLayer provides is retrieving information about the TCP options (if exist). We can iterate the TCP options using the methods getFirstTcpOptionData() and getNextTcpOptionData(option) and extract all the information on the TCP option such as type, length and value. In our example let's iterate over them and print their type:

	// go over all TCP options in this layer and print its type
printf("TCP options: ");
for (pcpp::TcpOptionData* tcpOption = tcpLayer->getFirstTcpOptionData(); tcpOption != NULL; tcpOption = tcpLayer->getNextTcpOptionData(tcpOption))
	printf("%s ", printTcpOptionType(tcpOption->getType()).c_str());

Let's see the method that gets the TCP option type as enum and converts it to string. Notice this method handles only the TCP options we have on the specific packet we're parsing, PcapPlusPlus support all TCP options types:

	std::string printTcpOptionType(pcpp::TcpOption optionType)
	switch (optionType)
	case pcpp::PCPP_TCPOPT_NOP:
		return "NOP";
		return "Timestamp";
		return "Other";

Parsing HTTP

Finally, let's see the capabilities HttpRequestLayer has to offer. First let's extract the layer from the packet:

// let's get the HTTP request layer
pcpp::HttpRequestLayer* httpRequestLayer = parsedPacket.getLayerOfType<pcpp::httprequestlayer>();
if (httpRequestLayer == NULL)
	printf("Something went wrong, couldn't find HTTP request layer\n");

Of course there is a similar class HttpResponseLayer for HTTP responses.

HTTP messages (both requests and responses) have 3 main parts:

  • The first line (also known as request-line or status-line) which includes the HTTP version, HTTP method (for requests) or status code (for responses) and the URI (for requests)
  • Message headers which include all header fields (e.g host, user-agent, cookie, content-type etc.)
  • Message body

The HTTP layer classes provide access to all of these parts. Let's start with showing how to get data from the first line:

// print HTTP method and URI. Both appear in the first line of the HTTP request
printf("\nHTTP method: %s\n", printHttpMethod(httpRequestLayer->getFirstLine()->getMethod()).c_str());
printf("HTTP URI: %s\n", httpRequestLayer->getFirstLine()->getUri().c_str());

As you can see the HttpRequestLayer class exposes a getter (getFirstLine()) that retrieves an object of type HttpRequestFirstLine that contain all of the first-line data: method, URI,etc. The method is returned as an enum so I added a simple function printHttpMethod to print it as a string:

std::string printHttpMethod(pcpp::HttpRequestLayer::HttpMethod httpMethod)
	switch (httpMethod)
	case pcpp::HttpRequestLayer::HttpGET:
		return "GET";
	case pcpp::HttpRequestLayer::HttpPOST:
		return "POST";
		return "Other";

Now let's see how to get header fields data:

// print values of the following HTTP field: Host, User-Agent and Cookie
printf("HTTP host: %s\n", httpRequestLayer->getFieldByName(PCPP_HTTP_HOST_FIELD)->getFieldValue().c_str());
printf("HTTP user-agent: %s\n", httpRequestLayer->getFieldByName(PCPP_HTTP_USER_AGENT_FIELD)->getFieldValue().c_str());
printf("HTTP cookie: %s\n", httpRequestLayer->getFieldByName(PCPP_HTTP_COOKIE_FIELD)->getFieldValue().c_str());

The HTTP request and response layers exposes a method getFieldByName() to get a header field data by it's name. The class representing a field is called HttpField and has some interesting API, but probably the most important method for parsing is getFieldValue() which returns the value of this header field as string. Please notice that I didn't write the header field names as strings but rather used a macro defined in PcapPlusPlus for some of the most useful HTTP fields (like host, cookie, user-agent, etc.).

Finally, let's see another cool method in HttpRequestLayer which is getURL() that forms and returns the full URL from the request (including host-name from "Host" header field + URI from the request-line):

// print the full URL of this request
printf("HTTP full URL: %s\n", httpRequestLayer->getUrl().c_str());

Now let's see the output:

HTTP method: GET
HTTP URI: /serv?s=19190039&t=1361916157&f=us-p9h3
HTTP host: geo.yahoo.com
HTTP user-agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_3) AppleWebKit/534.55.3 (KHTML, like Gecko) Version/5.1.3 Safari/534.53.10
HTTP cookie: B=fdnulql8iqc6l&b=3&s=ps
HTTP full URL: geo.yahoo.com/serv?s=19190039&t=1361916157&f=us-p9h3

Running the example

All code that was covered in this tutorial can be found here. In order to compile and run the code please first download and compile PcapPlusPlus code or downloaded a pre-compiled version from the latest PcapPlusPlus release. Then follow these instruction, according to your platform:

  • Linux and Mac OSX - make sure PcapPlusPlus is installed (by running sudo make install in PcapPlusPlus main directory). Then either change the Makefile.non_windows file name to Makefile and run make all, or run make -f Makefile.non_windows all
  • Windows using MinGW or MinGW-w64 - either change the Makefile.windows file name to Makefile and run make all, or run make -f Makefile.windows all
  • Windows using Visual Studio 2015 - there is a Visual Studio 2015 solution containing all tutorials here. Just open it and compile all tutorials

In all options the compiled executable will be inside the tutorial directory ([PcapPlusPlus Folder]/Examples/Tutorials/Tutorial-PacketParsing)

Go to top ↑